I shoot our club’s vintage sniper matches. I used an
original M1D, but I found this was too difficult to single load in the prone
position. As a collectable rifle, it just did not seem smart to put match wear
on this rifle. Plus there was always risk of an out of battery ignition. At our
club’s longest distance 300 yard, the 2.2 power, 70 year old, M84 scope was a
challenge. Frankly, the optics are not that good. While wonderfully accurate, the M1D just did
not fit the bill.
So I started with a Frankenstein Remington Model 1903 made
in late 1942. The gun has a matched barrel and receiver, as well as Remington
trigger parts. The rear sight and bolt are USGI replacements. The barrel has
excellent rifling but does contain one patch of minor pitting, this will never
be a collector grade barrel.
The stock is a repaired WW II vintage Keystone “C” stock. It
has a full pistol grip and provides a comfortable platform for this rifle. The
stock was cracked, sanded, and repaired. Its reasonable price and close color
match made it a natural fit. The cheek pad helps with the high rings needed to
ensure the opening and closing of the bolt clears the scope.
The Remington M1903 does shoot very well and the minor
pitting does not affect accuracy. The
S&K Instamount is an excellent product, its every bit as solid as a drilled
and tapped scope mount. I was initially skeptical that any “no drill and tap”scope
mount would actually work. I’m very pleased that this one does work so well. The
instructions don’t have any pictures (important for a visual learner like me)
but they are well written and easy to follow. Of course, the most difficult
part of mounting a scope is aligning the cross hairs. It’s easy to cant the
scope when tightening the ring screws. This job takes some care and mistakes can
be avoided by using a scope mounting kit.
The scope is a 50s vintage Weaver K6, a popular commercial
scope and can be found on auction sites, usually reasonably priced. While the
optics are not perfect it is adequate for our club matches at 300 yards.
